What does the compressed air unit for the purchase welding dust collector include? from exoltechps's blog

purchase welding dust collector Cleaning control using PLC microcomputer program controller, divided into constant pressure (automatic), timing (automatic), manual three control methods. Constant pressure control: according to the set pressure difference control, dust collector pressure difference exceeds the set value, each room automatically clean again in turn. Timing control: According to the set time, each room is cleaned once every other cleaning cycle. Manual control: The on-site operating cabinet can manually control the automatic cleaning of each room in turn, and can also be cleaned for each room. The control mode is selected by the user, and when the user has no requirements, the supply is controlled according to the timing.

The compressed air equipment of the purchase welding dust collector includes gas storage tank, air compressor station, pipeline pneumatic triad, etc. There are also gas bag and blowpipe for the purchase welding dust collector. purchase welding dust collector The cleaning power source comes from compressed air, compressed air equipment usually adopts oil-free compressor or ordinary compressor refueling and dewatering device, however, in order to determine the quality of compressed air, the design of compressed air station should be as close as possible to the dust collector to avoid condensation in the pipeline to produce water vapor. And for large pulse dust collectors, compressed air stations are used as far as possible to determine the stability of compressed air pressure. If it is not possible to design the air compressor station or the air compressor station is not close to the dust collector, the compressed air storage tank should be set near the dust collector equipment, so that the pressure of the compressed air source can be stable, on the other hand, the condensed water generated on the compressed air pipe can also be periodically discharged through the valve at the bottom of the compressed air tank, and the quality of the dust cleaning gas source of the pulse dust collector is determined.

The operation mechanism of the purchase welding dust collector is that the dust particles are filtered out after the dust gas is filtered through the filter data. The coarse dust is captured by the filter data mainly by the inertia collision effect, and the fine dust is captured by the dispersion and screening effect. The dust layer of the filter material also has a filtering effect. With the accumulation of dust on the surface of the filter material, the power and resistance of the purchase welding dust collector are increased correspondingly. When the pressure difference between the two sides of the filter material is large, some fine dust particles attached to the filter material will be kneaded. Reduce the power of the purchase welding dust collector. In addition, the high resistance of the purchase welding dust collector will significantly reduce the air volume of the dust collection system. Therefore, after the resistance of the purchase welding dust collector reaches the value, the ash should be cleaned in time. The primary layer can not be destroyed during cleaning to avoid power reduction. Generally, the dust removal power of new filter material is not high enough. Filter material after a period of time, because of screening, bump, stay, dispersion, static electricity and other effects, the surface of the filter bag accumulated a layer of dust, this layer of dust is called the first layer, in the future movement process, the first layer has become the main filter layer of the filter material, relying on the effect of the first layer, the filter material with large mesh can also obtain better filtering power.

purchase welding dust collector https://www.kaisenfilter.com/KSJ-1-5B-Welding-Fume-Extractor.html