hesters261's blog
Citizens in Ukraine are reportedly still able to access the internet in the midst of the war between the country and Russia. So, what makes internet services still active in Ukraine?
Experts say infrastructure in a number of major Ukrainian cities still has back-up infrastructure. The infrastructure is considered useful during a war situation like today.
However, internet traffic in some areas has decreased as citizens fled the country as a result of the war.
Internet provider Kyivstar said they had to work hard to keep Mariupol connected when the invasion took place
Roman Abramovich released Chelsea after the British government sanctioned him following Russia's invasion of Ukraine. The billionaire from Russia is also considered to have a close relationship with Russian President Vladimir Putin. Now, the Blues are getting ready to welcome a new owner.
Abramovich opened a price of 3 billion pounds for the club he bought in 2003. However, it has not been decided who the tycoon will take over the two-time Champions League winner.
Despite all that, word got out that Abramovich was preparing to buy a new club. According to CNN Turki, reported by Tribalfootball, Thursday (24/3), the Russian billionaire is in talks to buy Turkish club Goztepe. Representatives for Abramovich and Goztepe owner Mehmet Sepil have opened negotiations over the sale of the club.
Abramovich's super yacht, L'Eclipse is docked in Turkey. This could be a sign that the CNN report is correct that the two sides are in talks to buy local club Goztepe.
Abramovich is a billionaire who changed the face of Chelsea into a respected team in England and Europe. With the power of his money, he brought in a number of top players and great coaches to collect a lot of trophies.
Since he joined Stamford Bridge, Chelsea won two Champions League titles and five Premier League titles. Then five FA Cup trophies, one Club World Cup, two Europa Leagues, three Carling Cups (League Cup), one European Super Cup and two Community Shield trophies.
Now Abramovich must accept the fact that his togetherness ended because of the Russian invasion of Ukraine. He is rumored to be choosing prospective buyers who have the same vision and mission in building Chelsea
Marc Marquez fell in a horror accident in the warm-up session ahead of the 2022 Mandalika MotoGP. Marquez fell while turning at Turn 7 which made him thrown off the motorbike and rolled over in the gravel.
The terrible incident made Marquez rushed to the Mataram Hospital for first aid. Marquez finally chose to withdraw from the Mandalika MotoGP race for health reasons.
"Marquez's accident was one of the most brutal I have seen so far," said Alex Criville as quoted by Motosan.
"Fortunately he is fine and ended up not taking part in the race due to medical considerations. He looked dazed," said Alex Criville, who raced with Repsol Honda from 1994-2001.
Marc Marquez has two weeks to recover his condition. The next MotoGP race will be held at the Autodromo Termas de Rio Hondo Circuit, Argentina on April 3, 2022.
MotoGP Medical Director, Dr. Angel Charte, ensures that Marc Marquez's condition is not worrying after falling in a horror accident at the Mandalika Circuit, Sunday (20/3/2022). Marquez will continue his recovery in Barcelona, Spain.
"After Marc Marquez had a terrible accident, he was taken to the Hospital in Lombok to undergo a series of examinations. He was then brought back here," said Dr. Angel Chart.
"Nothing serious. Marc Marquez will return to Barcelona for further examination and recovery," said Dr. Angel Chart.
Repsol Honda racer, Marc Marquez, harbored anger and disappointment after canceling his race at the 2022 Mandalika MotoGP, Sunday (20/3/2022). Marquez canceled due to a horror accident.
"This is not my weekend because I have struggled and had problems from the start. A very bad crash in warm-up, maybe the biggest I've ever had," said Marc Marquez.
"I was taken to the hospital and although there were no serious problems, it was decided that I could not race. Of course this is a shame, but it is the best decision," said Marquez.
#Marquez has diplopia after crash in Mandalika
Marc Marquez is experiencing double vision problems or diplopia after crashing during the warm-up session for the Indonesian Grand Prix in Mandalika on Sunday, the Honda rider said as quoted by Reuters on Tuesday.
The six-time MotoGP champion had a crash at turn seven that sent him flying into the air for a hard landing on the edge. He hit his head but was spared serious injury when his motorbike was spinning in the air but missed him.
Marquez did not race after being declared unfit. The 29-year-old had a similar episode late last season after a concussion he suffered in a crash during training and said doctors advised him not to continue racing.
"I think I'm having deja vu," Marquez said on Twitter. "During the trip back to Spain, I felt uncomfortable with my vision and we decided to visit Dr. Sanchez Dalmau who confirmed I had another episode of diplopia."
"Fortunately, it wasn't as bad as the injury I had at the end of last year. But now it's time to rest and wait to get this far."
Honda said Marquez had undergone a medical in Madrid to evaluate all the bruising caused by the crash and an MRI of the brain to confirm he had no other injuries.
Marquez, who won six titles between 2013 and 2019, had a season-ending crash in the first race of the 2020 season when he broke his arm. He also missed four races in 2021 in order to fully recover from an arm injury and concussion.
Red Bull KTM racer, Miguel Oliveira, has successfully won the Mandalika MotoGP or MotoGP Indonesia 2022 race.
The Pertamina Grand Prix of Indonesia is the second series of the 2022 MotoGP World Championship which will be held at the Mandalika Circuit on Sunday (20/3/2022) afternoon WITA. Miguel Oliveira, who started the race from seventh place, appeared fantastic because he had led the race since the fifth lap.
The Portuguese rider took the MotoGP podium at Mandalika 2022 accompanied by Fabio Quartararo (Monster Energy Yamaha) and Johann Zarco (Pramac Racing Ducati).
This is Miguel Oliveira's fourth victory in his career in the MotoGP class. The Repsol Honda rider, who has collected eight world titles, Marc Marquez, was forced to leave the Pertamina Mandalika International Street Circuit without taking any points.
Marc Marquez cannot take part in the Mandalika 2022 MotoGP race due to a head injury. The injury was obtained by Marc Marquez after having an accident or crash highside at Turn 7 of the Mandalika Circuit in the warm up session.
Overall, Marc Marquez has experienced four accidents in the 2022 Indonesian MotoGP series. Marc Marquez has actually returned to the Mandalika Circuit paddock after undergoing an examination at a hospital located in Mataram City, West Nusa Tenggara.
However, Marquez still could not take part in the Mandalika MotoGP race because he was not given permission by the Repsol Honda and MotoGP team doctors. The team of doctors stated that Marquez was not fit to take part in the race at the Mandalika Circuit.
The distance or duration of the Mandalika MotoGP race, which was originally scheduled for 27 laps, was reduced to only 20 laps. The decision was taken because of the asphalt of the Mandalika Circuit.
This was revealed by the Safety Officer of the International Motorsport Federation (FIM), Franco Uncini. "We have decided to reduce the race distance to maintain track conditions because of the asphalt," Franco Uncini was quoted as saying by Sky Sports Italia. About 30 minutes before the race, the Mandalika Circuit was drenched in heavy rain.
The weather factor made the Indonesian MotoGP race which was originally scheduled to start at 14.00 WIB had to be postponed. From the live broadcast, it can be seen that several points on the Mandalika Circuit are starting to be flooded due to rain.
After being postponed for 75 minutes, the Mandalika MotoGP race finally started at 15.15 WIB. The Indonesian MotoGP was decided to run a wet race or race on a wet track because the Mandalika Circuit track was still not dry.
Monster Energy Yamaha racer, Fabio Quartararo, managed to maintain his leading position when the Mandalka MotoGP race started. However, Quartararo had to lose his leading position when he entered the second lap.
Quartararo had to drop to third place after being overtaken by Miguel Oliveira (Red Bull KTM) and Jack Miller (Ducati) on the longest straight at the Mandalika Circuit.
In the middle of the second lap, Jack Miller managed to overtake Oliveira to take over the lead of the race. Until the third lap, Jack Miller was still leading, followed by Oliveira and Alex Rins (Suzuki Ecstar).
Quartararo again slipped to fifth place after being overtaken by the Madalika Circuit straight way by Alex Rins and Johann Zarco (Pramac Ducati). Entering the fourth lap, Jack Miller and Oliveira who were in the front row began to separate from the group.
Towards the fifth lap, Jorge Martin (Pramac Racing) almost slipped when crossing at Turn 17 of the Mandalika Circuit. Right on the fifth lap, Oliveira successfully overtook Jack Miller to take over the lead of the race. Oliveira led by 1.125 seconds over Jack Miller on lap six.
Jack Miller's advantage over Alex Rins, who was in third place, was 2,043 seconds. Right on the seventh lap, Andrea Dovizioso (WithU Yamaha RNF) seemed to have an engine problem and had to pull over.
At the beginning of the 8th lap, Jorge Martin slipped at Turn 1 and was immediately thrown into the gravel area. The incident made Jorge Martin unable to continue the race.
Until the 10th lap, Miguel Oliveira still leads this time with a 2.970 second advantage over Jack Miller who is still following in second. The third position changed at Turn 12 on the 10th lap after Johann Zarco (Pramac Racing) successfully overtook Alex Rins.
On lap 12, Miguel Oliveira got further away and managed to lead by 4.040 seconds over Jack Miller. The three leading drivers on lap 12 were Miguel Oliveira, Jack Miller, and Johann Zarco. Exactly on the 15th lap, Quartararo successfully overtook Johann Zarco di
Bend 1 for third place. Two laps later, Quartararo managed to finish second after overtaking Jack Miller. Miguel Oliveira in the end came out victorious after not being overtaken until the end of the race.
One thing that is the biggest challenge for MotoGP racers at the Grand Prix of Indonesia on Sunday 20 March 2022 is the difficulty of overtaking at the Mandalika Circuit.
Defending champion Fabio Quartararo will look to maintain pole position after securing pole position thanks to a best record of 1:31,067 in the qualifying session, Saturday 19 March 2022.
The closest threat to the Yamaha rider is the Pramac Racing team duo, Jorge Martin and Johann Zarco, who parked their two Ducati motorbikes in the front row.
It's hard to know how the race will be, because it's a new track. We don't know what will happen, but we will try our best," Quartararo said after qualifying. "I feel much better than Qatar and my potential is much better to fight for the win here.
The Monster Energy Yamaha racer wants to forget the bad result at Losail where he was only able to finish P9 after his Yamaha bike experienced problems with tire pressure and a top speed deficit.
Arriving at Mandalika, the French racer faced a new challenge on a circuit that had just undergone re-pavement of some of its tracks following the recommendations of Dorna and the FIM after the official test in Lombok last month.
Although the track is still not completely clean, Quartararo feels the asphalt at the Mandalika circuit is better than the conditions he found during the pre-season test.
Then, the racing line which is still narrow at Mandalika does not give many choices for riders who want to put pressure on their rivals. "For me it's one of the most difficult tracks to overtake, so it's quite positive to start from the front row," said Quartararo.
2020 world champion Joan Mir was surprisingly eliminated from the race for the top two slots in Q1 and will start from P18 after struggling to find the right grip and setting in Mandalika.
After almost always falling when driving around corners, the Spaniard is not even sure he can survive the 27-lap race at Mandalika later. "Even I thought I was going to crash, because I was riding too close to the limit at every corner, and in these conditions it's very easy to make mistakes.
It will be difficult if we don't improve," said Mir. Mir will anticipate the decline in tire performance during the race and steal the opportunity if Suzuki can find better grip to maintain speed during the race later.
"It's not easy to overtake at this track, but when racing every lap it will be easy because of the decrease (tire performance). But this is not an easy track to go from 18th starting position," he said.
Next up: Another Suzuki team driver... Another Suzuki team driver Alex Rins was luckier than his teammate after securing P8. From the third row, Rins will try to push forward as early as possible at the beginning of the race.
"Here the difficult lap is overtaking, because there is only one racing line and not much space to overtake," said Rins, who found his bike spewing fire from the rear in FP3. "The overtake will be very tight with the other riders, so the key is a good start.
A good start and we need to be in the very front at Turn 1." Turns 1, 10 and the last two corners offer openings for overtaking, "but I said earlier the overtake will be very tight.
Ahead of the Mandalika MotoGP at the Mandalika Circuit, West Nusa Tenggara, on March 18-20 2022, Bastianini is again the champion.
Enea Bastianini won the Qatar MotoGP last week at the Losail Circuit. This makes him a driver to be reckoned with in MotoGP 2022.
Previously, in the Pre-Season Test in Mandalika, Bastianini was only in 13th place. This result is only half a second different from Espargaro's best lap.
This Italian man admits that it will be difficult to repeat his victory at the Mandalika MotoGP this time.
“I can't wait to come to Indonesia soon. We come from an amazing race in Qatar, where I claimed my first win.
It will be difficult to do it again this time, but we definitely showed good speed during the test," Bastianini said, quoted from Crash.net on Tuesday (15/3/2022).
Regarding the Mandalika circuit track, which was separated and combined, Bastianini hopes that the coating can be completed soon.
"They should have finished lining some parts of the track, so I didn't know what to expect. Even the tires will be different compared to the test, but we have to continue to work in the same way as we have done until now."
His team mate Fabio di Giannantonio will also try his best to earn his first MotoGP points after finishing 17th in Qatar.
“We are back in an amazing place, where we also have so many supporters. It's always a great thing and it's important to get warm support from people and I'm sure it will be like this at Mandalika,” said Giannantonio.
Not only that, he also said that he wanted to continue learning so that he could continue to improve little by little in Mandalika.
https://kaalama.org/read-blog/85327
https://www.skreebee.com/read-blog/95810
https://wadeszig.vip/mandalika-motogp-starts-soon/
https://bruinsextra.com/blogs/118245/Mandalika-MotoGP-Starts-Soon
Epson is collaborating with National Geographic to raise awareness actions for the protection of the world's permafrost – the frozen land beneath Earth's polar regions – by launching the 'Turn Down the Heat' campaign.
Many scientists worldwide warn of the threat of melting icebergs in the Arctic. This will have an impact on extreme sea level rise that will occur faster than previously thought.
The campaign comes at a time when scientists predict that the world's ice sheets will completely melt by 2100, this could drastically change the ecology, raise global sea levels and release more than 950 billion tons of methane into the atmosphere.
The program, led by National Geographic Explorer Dr Katey Walter Anthony, oversees Arctic observatories in Alaska and Russia to monitor the long-term impacts of climate change.
“The Arctic has literally melted before our eyes. We estimate that up to 10% of projected global warming this century could come from melting ice sheets, and this will affect the entire earth. What happens at the North Pole doesn't just happen at the North Pole. Our choices in work and life really matter.
When we and businesses can make smart decisions in choosing the technology to use, it will make a positive impact and difference to our environment.” said Dr. Katey Walter Anthony as the National Geographic Explorer.
According to him, saving energy is very important in preventing global warming, but many technologies consume significant volumes every day in businesses or homes every day.
In line with Dr. Katey, Epson's Global President, Yasunori Ogawa said preventing global warming and saving energy, Epson's pioneering series of printers are equipped with
Heat-Free Technology can prevent and reduce environmental impact by using low energy sources and replacing fewer parts.
“Sustainability is at the heart of everything we do at Epson. We are committed to not only reducing our environmental impact but helping our users to do so too.
We hope to make a difference in tackling global environmental issues with our users and business partners through our technology,” said Yasunori Ogawa.
Please note, at the beginning of the year, Epson Southeast Asia launched its sustainability campaign, “Be Cool” to raise awareness among users that productivity and sustainability do not have to be exclusive and separate.
Through this campaign, Epson Southeast Asia is encouraging businesses to “Be Cool” by leveraging how Epson's printing technology can make sustainable choices easier.
To raise awareness of sustainability to customers, businesses and partners, Epson Southeast Asia activated teams in Singapore, Indonesia, Malaysia, Philippines, Thailand and Vietnam
throughout the year for strategic market activities that will bring “Be Cool” and “Turn Down the Heat” closer to the community, and support the realization of the United Nation – Sustainable Development Goals program, namely responsible consumption and production (program no. climate change (program no.13), these two programs have become a priority.
“We want to create value in the environment across Southeast Asia to help achieve our global vision and the regionally defined UN SDGs.
With this parameter guide, we will work more aggressively across all business areas to create partnerships towards greater sustainability using Epson technology.” Said Siew Jin Kiat - Regional Managing Director of Epson Southeast Asia.
About Heat-Free Technology
Epson's Heat-Free Technology does not require heat in the ink dispensing process. On the other hand, pressure applied to Piezo elements can reduce environmental impact while increasing productivity without compromise.
CONTINUE READING THE ARTICLES BELOW:
Japanese electronics company, Epson has introduced an update to the SCARA All-in One T series robotic device, which aims to make it easier for users from beginners to professionals.
In his official statement, Monday, Team Lead Robotic Solution Business Unit (RSBU), Rudyanto Sudarman revealed that the Epson T series robots such as the SCARA All-in-One T3-B and T6-B Robots are equipped with Epson RC+ Express programming.
"The T3-B and T6-B series are equipped with Epson RC+ which is packed with features and Epson RC+ Express industrial automation development software without code which is of course designed for ease of use. Ideal for use by both beginners and advanced users," said Rudyanto Sudarman.
In addition to aiming to provide convenience, this renewal will also be able to meet production demands along with increasing product value, cost management efficiency, and ensuring the safety of working employees.
"As newcomers and experienced experts look for the right automation solution, Epson Robots, the world's #1 SCARA robot manufacturer, announced an update to its T-Series line with the T3-B and T6-B All-in-One Robot SCARA," he said. .
In this regard, Epson RC+ itself is an easy-to-learn programming language that offers a powerful set of tools to redefine automation efficiency.
https://bruinsextra.com/blogs/117278/Epson-introduces-the-T-series-SCARA-All-in-One-robotic
This technology is presented by Epson with a design that can develop simple and powerful robot programs easily and efficiently even for users who are beginners in programming.
Epson RC+ Express is also believed to be able to overcome automation barriers with an easy-to-use codeless teaching robot environment.
Epson is straightforward, saying that the new SCARA All-in-One T3-B and T6-B Robots will offer high quality and performance at an outstanding value by simplifying automation applications in completing production from complex to simple.
"For example, such as packaging, picking and placing, dispensing, and inspection are so easy," he explained.
The all-in-one industrial robot also includes intuitive software, advanced features and reliability issues found in high-end Epson robots.
All-in-one industrial robots can also keep total cost of ownership low which can be utilized by the automotive, medical development, laboratory automation, consumer electronics, electronic components and industrial industries.
The new SCARA robot from Epson features an All-in-One, space-saving design that includes a built in controller placed inside the robot with an internal power source for end-of-arm tooling.
The T3-B and T6-B are ensured to be compatible with Epson's integrated circuits such as vision guidance, IntelliFlex parts feeding, teach pendant, and master and slave field bus interfaces.
Additional updates were also provided for an improved form factor design and updated motion controls with smoother and faster cycle times. The main feature prepared for the device is that the bida device is easily installed and integrated quickly.
"Installation in minutes, unlike complex linear-slide systems, requires less time and money for system integration," he says.
Then, the value provided is also uncompromising, including the same intuitive software, advanced features, and reliability as found in high-end Epson robots. This can help and keep the total cost of ownership low.
Next, the device is available in 100V-240V power which is certainly low in wattage and power consumption. The device also does not require a special panel or plug.
"Built-in power for end-of-arm tooling, eliminating the need for an external power source. No batteries required for the encoder, minimizing downtime and reducing overall cost of ownership," he said.
Another integrated option, according to him, is the availability of a teaching pendant, a field bus master and slave interface board, including EtherNet/IP and additional instructions that facilitate integration with the Allen Bradley PLC.
As for the new intuitive software features, the simple visual interface is intended to streamline the automation and ease of programming of the Epson SCARA Robot for the needs of the growing automation business as manufacturers seek to increase volume and improve quality, cost and employee safety.
Tesla and SpaceX CEO Elon Musk and singer Grimes have welcomed a second baby girl, nicknamed "Y".
According to The Hollywood Reporter, Exa Dark Sideræl Musk was born in December last year through a surrogate. He will be joined by his older brother X A-12, whose pronunciation is "X A.I. Archangel", who was born in May 2020.
Musk's daughter will be referred to as "Y", while the eldest son will be referred to as "X".
The couple kept the birth of their second child a secret until it was revealed in Vanity Fair magazine where Grimes was the cover story.
According to him, the name Exa refers to the supercomputer term exaFLOPS, Dark stands for the "unknown", and Sideræl (pronounced "sigh-deer-ee-el") is described as the actual time of the universe, stellar time, deep space time or not. Earth's relative time.
Exa is the second child for Grimes, who has been in a relationship with Musk since 2018. Musk has five sons from a previous marriage. His first son, Nevada, died of SIDS at 10 weeks of age in 2002.
Grimes told Vanity Fair that she had a difficult first pregnancy, especially in the months leading up to the birth and even experienced bleeding.
"He was pressing on my nerves so I kept passing out. I took a few steps and passed out. It's kind of scary, because you don't want to fall much when you're eight months pregnant," Grimes said.
"So I'll just crawl into the bathroom and crawl back or whatever," he continued.
Although the couple split in September, Grimes confirmed they were back together.
"There are no real words to describe it. I would probably call him my girlfriend, but we are very united. We live in separate houses," said Grimes.
"We are best friends. We care about each other all the time. We just have our own business, and I don't expect anyone to understand it," he added.
Their daughter's presence was discovered by accident. During an interview, the Vanity Fair writer heard the sound of a baby crying on the top floor of the Grimes house.
At first, Grimes still didn't want to open up about this. But because the baby kept crying, Grimes finally admitted that he had a baby girl.
List of Companies Owned by Elon Musk
Elon Musk is one of the most famous billionaires in the world. How not, because the father of seven children has a fairly large influence, especially in the field of technology. Even Elon Musk is not just occupying the highest position in a company. Because he is a pioneer of such a big business. Even Elon Musk's company is not just one, but quite a few.
Even Elon Musk's company counts a total of up to eight companies. These companies operate in different fields. In fact, each of Elon Musk's companies has managed to launch a product that is considered successful in the community. Not only that, the products made by Elon Musk's company are in demand in the market and have successfully become the talk of the world community.
Automation technology will support the business world to create a variety of work environments and provide opportunities for employees to take on more attractive, qualified and career-driven roles.
"Many companies today are at a crossroads as they set their sights on the future, and automation will play an important role in a variety of forms, from robotics to analytics," said Sales Vice President of Southeast Asia, Zebra Technologies Asia Pacific, Christanto Suryadarma, in a statement. statement, Friday.
Cobots, robotic process automation (RPA), automated mobile robots (AMRs) and micro fulfillment centers are ready to welcome 5 years of rapid growth and will become fundamental to business operations such as digital information systems and mobile technology.
He considered, companies should consider increasing the strength of their workforce with robots, or they face the risk that their business growth will be hampered.
Robots are designed to adapt to existing operational and manufacturing environments, and manufacturers can take advantage of the flexibility and scalability of today's robotic automation solutions.
Some of these solutions can even be implemented in just a day or two. This will require a lot of support from a variety of trusted entities including solution providers who are highly skilled in manufacturing and/or robotics.
"Solution-focused technology will help transform business operations by creating more dynamic and highly efficient workflows.
By implementing the right automation, employees will be free from repetitive tasks and can contribute in a place that allows them to provide the most value," said Christanto.
"Companies will also gain the ability to see the entire company environment very well so they can make sharper decisions by relying on data-driven intelligence," he added.
Another important example is industrial automation. Machine vision and fixed industrial scanning, RFID and real time location systems will undergo a slight update process in 2022.
Automation in decision making is a by-product of machine vision, computer vision, AI/machine learning, predictive and/or prescriptive analytics, and sector-dependent location technology.
This will reduce the burden on employees having to make appropriate calls based on the limited information they have.
Decision makers in several sectors, including retailers and warehouse operators, have confirmed that they plan to add a new level of intelligence to their workflows to assist, and even automate, the decision-making process.
Workflow automation has become a priority in 2022 as data digitization matures and employees work in different locations.
This increased need for autonomy, speed and efficiency is driving a greater commitment to intelligent software-as-a-service (SaaS) solutions that can identify and assign, track status, and even act quickly when deadlines draw near.
