topsignaljammer's blog

The use of drone signal jammers needs to comply with local laws and regulations, and only operate within legal circumstances. The following is a general step-by-step guide, but please note that the exact instructions may vary by device model and manufacturer. Before operating a drone signal jammer, make sure you understand the device's instructions for use and operating manual in detail and follow the following general guidance:

Determine the operating environment: Before using a drone signal jammer, it is crucial to understand the conditions of the operating environment. Make sure you operate within an area that complies with local laws and regulations and avoid interfering with other legal communications equipment.

Set the working mode: Set the working mode of the signal jammer according to your needs and operation scenarios. Some jammers may have different modes, such as continuous jamming mode, pulse jamming mode, or directional jamming mode, etc. Choose the appropriate mode to achieve the desired interference effect.

Set interference parameters: Set the interference parameters of the jammer according to the communication frequency and protocol of the target drone. This may include selection of interference frequency, interference signal strength and interference range.

Monitoring effect: Before starting interference, detection equipment can be used to monitor the signal of the target drone to ensure that the jammer can detect and interfere with the target normally.

Start the jammer: Follow the instructions in the device's operating manual to start the drone signal jammer to start jamming the target drone's communication signal.

Monitoring and adjustment: During the jamming process, continuously monitor the jamming effect and adjust the jammer parameters to ensure the expected jamming effect is achieved.

Please note that the use of drone signal jammers may require special permits or authorizations. Before performing any operation, please carefully research and comply with local laws and regulations, and ensure that you have the relevant licenses or authorizations. In addition, when using drone signal jammers, be sure to follow safe operating principles and try to avoid unnecessary interference or danger to unrelated equipment and personnel.

GPS signal jammer and GSM signal jammer are two different devices used for different purposes, they have the following main differences:

Function and application: GPS signal jammer is used to block or interfere with the Global Positioning System (GPS) signal to prevent the GPS device from receiving positioning signals from satellites. It is often used in specific scenarios, such as military, security testing or personal privacy protection. The GSM signal jammer is used to block or interfere with the signal of the Global System for Mobile Communications (GSM) network. It is mainly used to prevent or limit mobile phone communications, such as in conference rooms, libraries, theaters and other places.

Signal type: The signal blocker is specially designed to interfere with GPS signals, that is, GPS signals on the L1, L2 and L5 frequency bands. The GSM signal jammer targets GSM network signals, including voice calls, text messages, and data transmission.

Device Design: GPS signal jammers are typically portable devices, similar to cell phones or small boxes, used to block GPS signals in a specific area. GSM signal jammers can be portable devices or fixed devices installed in specific areas to shield the transmission range of GSM signals.

Legal and Compliance: It is illegal to use, sell or manufacture GPS signal jammers and GSM signal jammers illegally in many countries. However, there may be a need for legitimate use of these devices in certain circumstances, such as in the military, law enforcement, or safety testing. Regulations and restrictions on the legal use of these devices may vary by region and country, so be sure to check your local laws before use.

In short, GPS signal jammers and GSM signal jammers are devices for different signal types and application scenarios. It is necessary to select the appropriate device according to specific needs and ensure legal use.

There are several key reasons for using cell phone jammers in exam rooms, all related to maintaining the fairness, security and order of the exam.

Preventing cheating: The main purpose of using mobile phone signal jammers in examination rooms is to prevent candidates from cheating using their mobile phones. Cheating on mobile phones may include looking up answers, transmitting information, using stored information, etc. These behaviors can seriously undermine the fairness and accuracy of the exam. By blocking mobile phone signals, candidates can be prevented from communicating with the outside world and reduce the possibility of cheating.

Protecting exam content security: In some important exams, exam content may be kept confidential in advance. By blocking mobile phone signals, candidates can be prevented from using their mobile phones to shoot, record or transmit exam content, thereby protecting the security and confidentiality of the exam. This ensures the fairness of the exam and ensures that all candidates can take the exam under the same conditions to avoid unfair competition.

Maintain order in the examination room: Mobile phones may cause noise and interference in the examination room, affecting the focus and concentration of other candidates. Using a cell phone signal blocker can effectively eliminate or reduce cell phone ringtones, vibrations and call sounds, creating a quiet and focused exam environment. This helps improve the candidate's focus and concentration, ensuring the exam goes smoothly.

Prevent external interference: There may be a large number of wireless signal sources or interference equipment around some examination venues, and these signal sources may cause interference to examination equipment or communications. By using a signal blocker, the impact of external interference on the exam can be reduced and the stability and accuracy of the exam process can be ensured.

To sum up, the use of mobile phone signal jammers can effectively maintain the fairness, security and order of the exam, and provide candidates with an exam environment conducive to concentration and fair participation. This ensures the accuracy and reliability of test results and maintains the credibility of educational assessments.

Generally speaking, the minimum range of a signal jammer is tens of meters in radius. As long as there are enough jammers, the maximum range is unlimited. Otherwise, how can the prison shield all signals? The range of the mobile phone signal jammer depends on your frequency modulation range. One unit is enough for a house of about 100 square meters. Shenzhen Texin Electronics has a variety of jammers that you can check out.

The shielding range of a mobile phone signal jammer is based on the power of the jammer. If tested in the field, the shielding range will be different depending on the strength of the local environmental signal. For example, the shielding range will be larger if the indoor signal is weak. What are the GSM base stations for outdoor use accessories? Then the GSM signal is within the outdoor shielding range!

Theoretical analysis shows that when the mobile phone signal jammer is working, if the setting is improper and the transmission power is too large, in a small conference room, classroom and other closed spaces, the electromagnetic waves will be superimposed in the small space and pass through the walls and walls that are originally separated from the outside. Multiple reflections from the ceiling and the ground will expose people in the room to serious electromagnetic pollution. According to the survey, the college entrance examination and the high school entrance examination are the occasions where mobile phone signal jammers are used the most. In some examination rooms where cell phone signal jammers are used, some parties (college entrance examination inspectors, candidates and teachers) become irritable and unable to concentrate. Some candidates There may even be headache symptoms. There are various indications that if the transmission power of the mobile phone signal jammer is turned on too high, it will seriously affect the normal thinking of the candidates in the examination room.

When you really need to use a jammer, try to use a low-power mobile phone signal jammer. If one can solve the problem, do not install multiple jammers. The lower the installation position, the better. Do not hang it above people's heads. This is very harmful to human health. The mobile phone signal jammer we set up during the county economic work conference in the province was placed among the flowers on the ground beside the wall of the conference room. It not only achieved the shielding effect, but also did not affect the beauty of the venue, which can be said to be the best of both worlds.

A signal blocker in the examination room is a device used to prevent candidates from cheating using mobile devices such as mobile phones. It emits radio interference signals so that mobile phones and other mobile devices in the examination room cannot be used normally, thereby ensuring that the examination is conducted fairly and impartially.

This equipment is usually purchased by the school or education department and installed in the examination room before the examination. Its working principle is to block the communication signals of mobile phones and other mobile devices in the examination room by emitting radio interference signals, making them unable to work normally. In addition, some examination rooms will adopt other measures, such as setting up metal detectors, surveillance cameras, etc., to prevent candidates from using high-tech means to cheat.

It should be noted that the use of cell phone signal jammers must comply with relevant laws, regulations and regulations, and must not infringe on students' personal rights and property rights. At the same time, safety issues need to be paid attention to during use to avoid harm to students.

The reasons for using a mobile phone jammer during exams are as follows:

Some students like to use mobile phones to cheat during exams. Installing mobile phone blocking devices can prevent students from cheating through mobile phones. As a very simple electronic device for cheating, the mobile phone can easily obtain the answers you want from the Internet of Things. This small and easy-to-hide electronic device gives the invigilator a headache.

The examination room shielding device emits a signal similar to a base station, covering the signal transmitted by the mobile phone, thereby destroying the connection between the mobile phone and the base station. The power of the examination room mobile phone signal shielding device will most likely exceed the usual signal strength, thus achieving the desired shielding effect.

A signal blocker in the examination room is a device used to prevent candidates from cheating using mobile devices such as mobile phones. It emits radio interference signals so that mobile phones and other mobile devices in the examination room cannot be used normally, thereby ensuring that the examination is conducted fairly and impartially.

This equipment is usually purchased by the school or education department and installed in the examination room before the examination. Its working principle is to block the communication signals of mobile phones and other mobile devices in the examination room by emitting radio interference signals, making them unable to work normally. In addition, some examination rooms will adopt other measures, such as setting up metal detectors, surveillance cameras, etc., to prevent candidates from using high-tech means to cheat.

It should be noted that the use of cell phone signal jammers must comply with relevant laws, regulations and regulations, and must not infringe on students' personal rights and property rights. At the same time, safety issues need to be paid attention to during use to avoid harm to students.

The reasons for using a mobile phone jammer during exams are as follows:

Some students like to use mobile phones to cheat during exams. Installing mobile phone blocking devices can prevent students from cheating through mobile phones. As a very simple electronic device for cheating, the mobile phone can easily obtain the answers you want from the Internet of Things. This small and easy-to-hide electronic device gives the invigilator a headache.

The examination room shielding device emits a signal similar to a base station, covering the signal transmitted by the mobile phone, thereby destroying the connection between the mobile phone and the base station. The power of the examination room mobile phone signal shielding device will most likely exceed the usual signal strength, thus achieving the desired shielding effect.

Recently, a customer asked this question: The original cell phone jammer in the unit has a good shielding effect on smart phones, but the shielding effect on elderly phones is not very good. Why is this?

First of all, according to the principle of mobile phone jammer, what the cell phone signal jammer interferes with is the communication signal between the base station and the mobile phone. It has nothing to do with the brand and model of the mobile phone. However, due to different mobile phone manufacturers, differences in production processes, and various There are differences in the components used by mobile phone manufacturers. Mobile phones of different brands and models also have certain differences. We will not consider other functions. We will only discuss the ability of the mobile phone itself to receive signals. So under the same signal strength, the mobile phone The ability to receive signals is strong, and the mobile phone can be used normally in places with weak signals. However, the signal strength from the base station to this location does not change at this time, and the shielding range of the mobile phone jammer depends on the distance of the base stations surrounding the use site, that is, the signal strength from the base station to the use site. It has nothing to do with the brand and model of the mobile phone.

The reason why elderly phones cannot be shielded at the use site is because the ability of elderly phones to receive signals is stronger. But if the on-site signal has been interfered by the signal of the mobile phone jammer, then even an elderly phone will still not have a signal.

If the mobile phone jammer does not have a good shielding effect on the elderly mobile phone, then the signal blocker needs to be adjusted, either by increasing the transmit power of each shielding module of the mobile phone jammer, or by selecting a high-power mobile phone jammer, or by The shielding module of the shielding device should be rationally adjusted, and the output frequency of the shielding module should be refined again. That is to say, the shielding module should be added to reasonably split the transmission signal frequency of the shielding module, such as the original output frequency range of a shielding module. It is 80MHz. By adding modules, the 80MHz frequency is divided into two shielding module outputs, so that the shielding effect can be relatively improved and the signal frequency band used by elderly phones can be covered in a targeted manner.

Due to the development of communication technology, personal mobile communications have brought convenience to people's lives, but the adverse effects on prisons, detention centers and other similar situations have become increasingly prominent. Once mobile phones are illegally brought into prisons and used, it will bring great harm to the management and security of prisons, detention centers and other places. Therefore, only by establishing a truly effective mobile phone signal blocking system can we provide prisons and detention centers with strong technological support.

However, due to the current mixed market, many cheap cell phone jammers are mainly suitable for general civilian use due to limitations in performance indicators, reliability, operating conditions, etc. However, there may be certain problems when used in large places such as prisons and detention centers. For example, external interference problems, some even seriously affect public communications.

Why do mobile phone signal jammers purchased by the Provincial Prison Administration Bureau cause such great interference to surrounding public communications? Let me analyze it a little bit. If there are any shortcomings, I hope you guys can correct me:

1. Mobile phone signal shielding is technically just a small branch of the wireless signal shielding system. Its essence is electronic countermeasures, or co-channel interference, which uses equipment to send out high-frequency signals through antennas, allowing mobile phones to receive them. Bit errors occur during the downlink signal and cannot be recognized and connected to the network. The mobile phone displays a no-network status, which meets the signal shielding requirements;

2. Regarding mobile phone signal blocker, everyone knows that they need to interfere with downlink signals. However, due to a series of factors such as technical cost, price, and production constraints, it is difficult to only interfere with downlink signals. Therefore, some unscrupulous manufacturers do not make accurate signal jammers in order to improve the interference effect. Adjusting the frequency range will cause some interference energy to the uplink, which can indeed greatly improve the interference capability and achieve a hit-or-miss effect, but it sacrifices public interests;

3. Mobile phone signals may vary greatly in the same room at different locations and at different times. According to actual experience, it can reach about 10dBm. In terms of conversion success rate, the difference is 10 times. It can be seen that mobile phone signal blocking is actually a technically demanding project, and it cannot be solved by simply purchasing a mobile phone signal jammer and installing it yourself. Site survey, power calculation, construction design, equipment debugging, etc. are all complementary and inseparable.

4. As Liuzhou Prison purchased and installed more than 300 mobile phone signal jammers, from a professional point of view, there are major problems in itself. When signal shielding is required in a large area and complex environment, high-gain antennas should be used for large-scale shielding combined with small The indoor antenna at the leakage point in the range is shielded by supplementary optimization. The angle of the antenna and the power of the equipment require professional personnel to configure and debug in order to achieve the perfect effect of strict shielding inside the prison and no interference outside the prison. Short-term signal shielding in schools can use high-quality low-power portable jammers or temporary antenna deployment.

There are many power supply methods for 5G jammers. First, they are classified according to the size of the radio frequency transmission power. The power supply methods of 5G mobile phone jammers in different categories are roughly as follows:

1. High-power 5G mobile phone jammer (transmitting power greater than 50W): usually powered by AC directly. Because the power supply of this type of product consumes a lot of power, AC power supply can provide sufficient power to the device;

2. Medium-power 5G mobile phone jammer (transmission power greater than 2-20W): Most use AC power supply, and a small number use DC power supply or AC and DC switchable power supply;

3. Low-power 5G mobile phone jammer (transmission power less than 2W): Most of these products are handheld or concealed 5G mobile phone jammers. These products are mainly powered by DC. When powered by AC, they mainly charge the battery. . Some models can be turned on while charging.

Due to its small transmitting power, the low-power 5G cell phone signal jammer usually consumes no more than 200W. Therefore, some customers also use it in cars and use the cigarette lighter interface on the vehicle for power supply. It must be noted here that the total power output of the car cigarette lighter is limited. Once the power is overloaded, it may cause damage to the vehicle's power line.

At present, you can often see the appearance of mobile phone signal jammers in examination rooms in schools. It is not uncommon until now. On the contrary, it is used in more and more places. It is generally used before and after the classroom and when preparing for exams. This device not only blocks mobile phone signals, but also provides candidates with a level playing field. The installation of a mobile phone signal jammer in the examination room may result in no network signal in an area, so special attention must be paid when using it, but this does not affect the transmission of base station signals.

Mobile phones have affected everyone's lifestyle, but this may have an impact on some students. Excessive use of mobile phones will not only affect vision, but may also affect academic studies. Since the emergence of mobile phone signal jammers in examination rooms, it has cracked down on the use of mobile phones by some students in school. And it only blocks mobile phone signals, and the use of other electronic devices and signals from base stations are not affected. Nowadays, many students have mobile phones, lack self-control, are addicted to games and novels, and use mobile phones to cheat in exams. Many schools install them and control them.

Send signals in the designated frequency band and block the mobile signals received by the mobile phone. In this way, the mobile phone cannot connect to the network and cannot send and receive short messages through the mobile phone, making the original message unrecognizable, thus achieving the purpose of shielding. This is the main purpose of the cell phone signal jammer in the examination room. work process. Reasonable use can completely avoid interfering with the normal use of other electronic products, so there is no need to worry too much about such products.