The greasy ink on the printing equipment can be removed as soon as it is torn off, and the nano-coating can easily remove the ink stains. | Forum

Original title: Oil stains on printing equipment can be removed as soon as the ink is torn off, and the nano-coating can easily remove ink stains. We know that in the printing process, the ink is easy to dirty the equipment, or the parts of the equipment, need to use special cleaning agents or professional technicians to clean the ink pollution. If it is not cleaned in time, it will not only reduce the quality of printing, but also bring great damage to the equipment itself. Over time, it may also affect the performance of the equipment. Just like the reason that minor illnesses are not treated and serious illnesses are difficult to treat, if the printing equipment is not cleaned in time, it may need to bear a relatively large maintenance cost in the later period, which is also considerable. Is there any other way to clean the ink that is difficult to clean besides using a special ink cleaner or asking a professional technical cleaner to clean it? We can see what the nano coating can do. We took a quiz and watched the video first. We first pour some oily printing ink into the cup. The ink is not diluted, so the ink is very viscous. We prepare two aluminum alloy panels, one of which is made of nano-coating. The method of making nano-coating is very simple. We only need to wet the aluminum alloy panel with nano-solution, and then wait for 24 hours to dry, or in the baking state, set the temperature to 110 C, bake for 30 minutes, and the coating can be done. Expand the full text After the nano coating is finished, it will have the properties of hydrophobicity, oleophobicity, acid and alkali resistance, and corrosion resistance. At this time, printed tape measure , we will test whether our nano coating has the performance of anti-penetration to the ink. We use a cotton swab to dip a little ink and smear it on the panel. We can see that the ink is easy to smudge on the panel without nano-coating, while the ink is not easy to disperse on the panel with nano-coating. After a period of time, we touched it with our hands and found that the ink had dried up. Let's just dig into the ink with our fingernails. Because the aluminum alloy has not been pretreated, the ink itself is not sticky, but the ink that is not sticky is also very fragmentary and not easy to clean. It can be imagined that if it is a very thick ink, it takes a lot of work to clean it. The coated panel, the ink is easy to fall off, and it is much easier to clean. After cleaning, the coating of the panel is still intact. We also did a drip test, and the water drops will roll down, which shows that after the ink is cleaned, it will not cause damage to the nano-coating. It can meet the performance requirements for long-term use. The use of nano-coatings can reduce the cost and frequency of cleaning, and even simplify the cleaning process, making the maintenance of printing equipment a relatively simple matter. The nano coating is colorless and transparent, the thickness is calculated by micron, the appearance of the base material is not changed, and the requirement of the base material on accurate size can be met. The main components of the nano-coating are silicon dioxide and alcohol. Silicon dioxide is the raw material of glass and ceramics, and also the raw material of sand for children to play at the seaside. It is safe and environmentally friendly. Because silicon dioxide has the performance of ultraviolet resistance, it can also achieve non-yellowing, lasting and effective performance in the aspect of ultraviolet resistance and aging resistance. In the process of using printing equipment, the equipment needs to be cleaned frequently, which is not a small expenditure. The use of nano-coating is like putting on an invisible protective clothing for the equipment, reducing the number of cleaning and the use of detergents. The nano coating is simple to operate, can be made at home, and can be made in one day. Have you come up with a business idea for such a good nano-coating? Return to Sohu to see more Responsible Editor: (function() { function getBrandHtml() { var brands = [], html = ''; for(var i = 0; i < brands.length; i++) { var brand = brands[i]; if(brands.length i+1) { html+= ''+brand.name+''; } else { html+= ''+brand.name+'、'; } } return html; }; if(document.getElementById('linkBtn')){ document.getElementById('linkBtn').onclick = function() { $('#brands').removeClass('brand');$ ( '# tipInfo').text ( 'Real name responded'); $ ('#linkBtn').remove();$ ('.real-response .content').css('line-height', '20px');$ ('.real-response .time').css('line-height', '20px'); }; document.getElementById('brands').innerHTML = getBrandHtml(); }; })();。 tape-measure.com